 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Differential Receiver The MC10EL/100EL16 is a differential receiver. The device is functionally equivalent to the E116 device with higher performance capabilities. With output transition times significantly faster than the E116 the EL16 is ideally suited for interfacing with high frequency sources. The EL16 provides a VBB output for either single-ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16 as its current sink/source capability is limited. Whenever used, the V BB pin should be bypassed to ground via a 0.01f capacitor. Under open input conditions (pulled to VEE) internal input clamps will force the Q output LOW. MC10EL16 MC100EL16 * * * * 250ps Propagation Delay High Bandwidth Output Transitions 75k Internal Input Pulldown Resistors >1000V ESD Protection 8 1 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 LOGIC DIAGRAM AND PINOUT ASSIGNMENT NC 1 8 VCC D 2 7 Q D 3 6 Q PIN DESCRIPTION VBB 4 5 VEE PIN D Q VBB FUNCTION Data Inputs Data Outputs Ref. Voltage Output 12/93 (c) Motorola, Inc. 1996 3-1 REV 2 MC10EL16 MC100EL16 DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol IEE VBB VEE IIH Characteristic Power Supply Current Output Reference Voltage Power Supply Voltage Input HIGH Current 10EL 100EL 10EL 100EL 10EL 100EL -1.43 -1.38 -4.75 -4.20 -5.2 -4.5 Min Typ 18 18 Max 22 22 -1.30 -1.26 -5.5 -5.5 150 -1.38 -1.38 -4.75 -4.20 -5.2 -4.5 Min 0C Typ 18 18 Max 22 22 -1.27 -1.26 -5.5 -5.5 150 -1.35 -1.38 -4.75 -4.20 -5.2 -4.5 Min 25C Typ 18 18 Max 22 22 -1.25 -1.26 -5.5 -5.5 150 -1.31 -1.38 -4.75 -4.20 -5.2 -4.5 Min 85C Typ 18 21 Max 22 26 -1.19 -1.26 -5.5 -5.5 150 Unit mA V V A AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) -40C Symbol tPLH tPHL tSKEW VPP VCMR Characteristic Propagation Delay to Output (Diff) (SE) Duty Cycle Skew1 (Diff) Minimum Input Swing2 Common Mode Range3 150 -0.4 See3 Min 125 75 Typ 250 250 5 150 -0.4 See3 Max 375 425 Min 175 125 0C Typ 250 250 5 Max 325 375 20 150 -0.4 See3 Min 175 125 25C Typ 250 250 5 Max 325 375 20 150 -0.4 See3 Min 205 155 85C Typ 280 280 5 Max 355 405 20 ps mV V Unit ps tr Output Rise/Fall Times Q 100 225 350 100 225 350 100 225 350 100 225 350 ps tf (20% - 80%) 1. Duty cycle skew is the difference between a TPLH and TPHL propagation delay through a device. 2. Minimum input swing for which AC parameters guaranteed. The device has a DC gain of 40. 3. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin and 1V. The lower end of the CMR range is dependent on VEE and is equal to VEE + 2.5V. MOTOROLA 3-2 ECLinPS and ECLinPS Lite DL140 -- Rev 3 MC10EL16 MC100EL16 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 ISSUE P -A- B M 8 5 X 45 _ J 1 4 4X -B- M_ G F NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 P 0.25 (0.010) M -T- 8X C SEATING PLANE D 0.25 (0.010) M K TB S A S Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com R JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 ECLinPS and ECLinPS Lite DL140 -- Rev 3 3-3 *MC10EL16/D* MC10EL16/D MOTOROLA |
Price & Availability of MC10EL16
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |